hydraulic pressespresse idraulichehydraulic presses

POLYMER MOLDING PRESSES.

Presses for heating / material preparation - AEM3

Press for heating and molding composite materials, SMC and polymers.

- Guided press with high geometric precision
- Pressing power 10-100 TONN
- Dimension of the heated pressing surface of the lower surface 3000mm X 1700mm
- Dimension of heated pressing plate mobile plate 3000mm X 1700mm
- Vertical opening 1200mm
- Hydraulic cylinder stroke 1000mm
- PLC settings from the latest generation touch screen
- No-load handling speed 200mm/sec
- Working speed 5-15mm/sec
- Material heating surfaces up to 250 °C
- Possibility of heating floors in zones (high energy savings)
- INDUSTRY 4.0 compatible
Presses for heating / material preparation - AEM3

Presses for heating / material preparation.

Front protection OPTICAL BARRIERS
Rear protection OPTICAL BARRIERS
Right side protection FIXED HOUSING / ELECTRIC CABINET
Left side protection FIXED HOUSING / ELECTRIC CABINET
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 50 KW including heating plans
Thrust force of the main cylinder from bottom to top 40 Tons
Operator side horizontal light 2,700 mm
Vertical light 600 mm
Main cylinder stroke 600 mm
Height of the worktop from the ground 1,160 mm
Dimension of the lower worktop 2700x1950 mm
Dimension of the mobile worktop 2700x1950 mm
Rapid descent speed 80 mm / sec
Working speed 5 mm / sec
Rapid ascent speed 50 mm / sec
Press for refractory materials - AEM3

Press for refractory materials.

Front protection - PHOTOELECTRIC BARRIERS
Rear protection - FIXED CRANKCASE
Right side protection - FIXED HOUSING
Left side protection - FIXED HOUSING
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 20 KW
Main cylinder thrust force 50 Tons
Pushing force of sheet metal pressing cylinder 15 Tons
Operator side horizontal light 600 mm
Side horizontal light 280 mm
Vertical light 650 mm
Main cylinder stroke 400 mm
Stroke cylinder press sheet 200 mm
Height of the worktop from the ground 900 mm
Dimension of the lower worktop 600x600 mm
Mobile worktop size 600x600 mm
Dimension of the sheet metal pressing worktop 300x300 mm
Fast descent speed 100 mm / sec
Working speed 5 mm / sec
Fast ascent speed 100 mm / sec
Compacting press - compactor - AEM3

Compacting press - compactor.

Front protection: photoelectric barriers
Rear protection: fixed screwed casing
Right side protection: closed press structure
Left side protection: closed press structure
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 10 KW
Thrust force of main cylinder 80 Tons
Operator side horizontal light 1580 mm
Vertical light 2700 mm
Main cylinder stroke 1700 mm
Height of the worktop from the ground 270 mm
Dimension of the lower worktop 1580x1160 mm
Dimension of the mobile worktop d.800 mm
Rapid descent speed 50 mm / sec
Working speed 5 mm / sec
Rapid ascent speed 50 mm / sec
polymer molding presses - AEM3

150 ton press for gaskets.

Front protection photoelectric barriers
Screwed rear casing protection
Right side closed
Left side closed
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 4 KW
Thrust force of main cylinder 150 Tons
Operator side horizontal light 1050 mm
Side horizontal light 600 mm
Vertical light 400 mm
Main cylinder stroke 400 mm
Height of the worktop from the ground 1000 mm
Lower worktop size 1000x1000 mm
Mobile worktop size 1000x1000 mm
Rapid descent speed 10 mm / sec
Working speed 3 mm / sec
Rapid ascent speed 10 mm / sec
polymer molding presses - AEM3

PRESSES SUITABLE FOR HOT STAMPING OF PARTICULARS IN THERMOPLASTIC / POLYMER MATERIALS.

- 200TON POWER
- LIGHT AMONG THE SHOULDERS 2050MM
- LIGHT BETWEEN THE LATERAL SHOULDERS 800MM
- LIGHT BETWEEN BANK AND PISTON ALL REPENTED WITH PLATES 1400MM
- STROKE 600MM
- DESCENT SPEED 100MM/SEC
- WORKING SPEED 5MM/SEC
- RETURN SPEED 100MM/SEC
- PRESS COMPLETE WITH MOBILE PLATE 2000x1000MM AND LOWER FROM 2000x1200MM COMPLETE WITH "T" CAVES AND DRILL FOR PASSING THE SPARK PLUGS
- MOBILE FLOOR AND LOWER FIXED TABLE WITH POSSIBILITY OF HEATING UP TO A MAXIMUM TEMPERATURE OF 150 ° C
- "SELF-LEARNING" ELECTRIC SYSTEM WITH POSSIBILITY OF SETTING UP HIGH / INTERMEDIATE / LOW, PRESSURE PRESS, PRESSURE PARKING TIME
- PRESS EQUIPPED WITH OPTICAL BARRIERS OF LEVEL IV BRAND "KEJENCE" FROM 1400MM PLACED ON THE OPERATOR SIDE AND OPPOSITE OPERATOR AND FIXED PROTECTION IN THE NETWORK ON THE REMAINING SIDES PRESS
- PRESS EQUIPPED WITH N ° 08 FREE ELECTRONIC INPUTS / OUTPUTS TO ATTACH EVENTUAL ROBOTS (CUSTOMER CHARGES)
- OIL-HYDRAULICS PLANT BRAND PARKER / DENISON
- TANK BEHIND THE PRESS UPPER WITH ABOUT 600LT HYDRAULIC
- SYSTEM EQUIPPED WITH PROPORTIONAL SOLENOID VALVE FOR THE ADJUSTMENT OF SPEED IN THE STAGE OF DESCENT AND WORKING PHASE
- OVERALL DIMENSIONS 3.100x1.800x3.900MM
- WEIGHT 11,000Kg
polymer molding presses - AEM3

PRESS FOR DIAMOND PRINTING

- 300 TONN POWER
- LIGHT between uprights OPERATOR SIDE mm.1.500
- VERTICAL LIGHT between OPENED FLOORS mm.400
- WORKTABLE 1,500 mm * 1,500 mm
- CYLINDER PRESS RANGE mm.400
- SPEED CLOSING PRESS mm./sec. 10
- WORKING SPEED PRESS mm./sec. 3
- SPEED OPENING PRESS mm./sec. 10
polymer molding presses - AEM3

PRESS FOR RUBBER

- 200 TONN SUPERIOR POWER
- 30 TONN PRESSURE CYLINDER POWER
- LIGHT between OPERATOR SIDE COLUMNS mm. 1,200
- LIGHT between the LATERAL COLUMNS mm. 1,200
- VERTICAL LIGHT between OPENED FLOORS mm. 500
- WORKING PLAN 1200mm x 1200 mm.
- UPPER CYLINDER STROKE mm. 500
- PREMILAMINE CYLINDER STROKE mm. 230
- SPEED CLOSING PRESS mm./sec. 28
- WORKING SPEED PRESS mm./sec. 3
- SPEED OPENING PRESS mm./sec. 28
polymer molding presses - AEM3

PRESS FOR PLASTIC

- 500 TONN POWER
- LIGHT between the OPERATOR SIDE COLUMNS mm. 1,800
- LIGHT between the LATERAL COLUMNS mm. 1,200
- VERTICAL LIGHT between OPENED FLOORS mm. 500
- WORKING PLAN 1500mm x 1500mm
- UPPER CYLINDER STROKE mm. 500
- SPEED CLOSING PRESS mm./sec. 28
- WORKING SPEED PRESS mm./sec. 2
- SPEED OPENING PRESS mm./sec. 28
polymer molding presses - AEM3

TEFLON PRESSING MACHINE

- POWER 150 TONN
- LIGHT between the uprights OPERATOR SIDE mm. 1,500
- VERTICAL LIGHT between OPENED FLOORS mm. 500
- WORKING PLAN 1,500mm * 600mm
- CYLINDER PRESS RANGE mm. 400
- SPEED CLOSING PRESS mm./sec. 10
- WORKING SPEED PRESS mm./sec. 3
- SPEED OPENING PRESS mm./sec. 10
polymer molding presses - AEM3

POLYMER MOLDING PRESS

- POWER 150 TONN
- LIGHT between the uprights OPERATOR SIDE mm. 820
- VERTICAL LIGHT between OPENED FLOORS mm. 400
- WORKING PLAN 800mm * 800mm
- CYLINDER PRESS RANGE mm. 400
- SPEED CLOSING PRESS mm./sec. 28
- WORKING SPEED PRESS mm./sec. 3
- SPEED OPENING PRESS mm./sec. 28